Ford

GV6P7000CA HS7P7000AA F2GP7000CA Ford Fusion 6F35 Transmission

OE NO.:GV6P7000CA HS7P7000AA F2GP7000CA
Model Number:6F35
Transmission Speeds:6
Gearbox Type:Automatic Type
Product description: Application: * Ford SUVs (Core Market): * Escape / Kuga : 1.5L, 1.6L, 2.0L, 2.5L (2009 - 2019) Edge: 2.0L EcoBoost (2012 - 2018) Explorer: 2.0L, 2.3L EcoBoost (2012 - 2019) * Ford Passenger Cars
INQUIRY

Model Number	6F35
MOQ	1 Pcs
Condition	Remanufactured
Warranty	6 Months

The automatic transmission assembly with reference numbers GV6P7000CA, HS7P7000AA, and F2GP7000CA is designed for the Ford 6F35 6-speed automatic transmission. This unit features electronic shift control and a lock-up torque converter, delivering smooth shifting and improved fuel efficiency for Ford Fusion, Escape, and related platforms.

Quick Specifications:

Part Numbers: GV6P7000CA / HS7P7000AA / F2GP7000CA
Transmission Model: 6F35 (6-Speed Automatic)
Configuration: Front-Wheel Drive (FWD) / All-Wheel Drive (AWD) compatible
Fluid Type: Mercon LV (Low Viscosity)
Fluid Capacity: ~8.5 - 9.5 Liters (dry fill)

Applications:

Ford Fusion (2010-2020, 2.5L & EcoBoost variants)
Ford Escape / Kuga (2013-2019)
Ford Focus (2.0L GDI variants)
Ford Mondeo (2014-2020)
Lincoln MKZ (select variants)

Complete Assembly Includes:

✅ Transmission case with internal gear train
✅ Torque converter with lock-up clutch
✅ Valve body with solenoids
✅ Oil pump, filter, and clutch packs
✅ Speed sensors and sealing gaskets

Note: Mounts, shift cables, external cooler lines, and wiring adapters may need to be transferred or purchased separately.

Key Features:

✅ 6-speed architecture for optimized acceleration and fuel economy
✅ Adaptive shift strategy learns driver habits
✅ Lock-up torque converter reduces slippage
✅ Compatible with Mercon LV fluid for extended service
✅ Robust design for high-mileage sedan and SUV use

Technical Notes:

Installation Criticals:

Fluid Fill: Must follow specific "fill and check temperature" procedure (85°C - 95°C) using a scan tool. Over/under-filling causes failure.
TCM Programming: Adaptation reset and software calibration often required after installation.
Torque Converter: Ensure full seating ("three clicks") before mating to engine to prevent pump damage.
Cooler Flushing: Flush cooler and lines thoroughly to remove debris from the old unit.