30500-0R060 Toyota RAV4 2.5L UB80F Transmission

Model Number	UB80F
MOQ	1 Pcs
Condition	Remanufactured
Warranty	12 Months

The automatic transmission assembly with reference numbers 30500-0R060 and 30500-42360 is designed for the Toyota UB80F 8-speed automatic transmission. This unit features Direct Shift-8AT electronic control and a wide-range lock-up torque converter, delivering smooth shifting and improved fuel efficiency for Toyota RAV4, Camry, and related AWD platforms.

----------------------------------------

Quick Specifications:
• Part Numbers: 30500-0R060 / 30500-42360 / 30500-42370
• Transmission Model: UB80F (8-Speed Direct Shift Automatic)
• Configuration: All-Wheel Drive (AWD / 4WD) compatible
• Max Input Torque: ~280 - 300 Nm
• Fluid Type: Toyota ATF WS (World Standard Low Viscosity)
• Fluid Capacity: ~7.5 - 8.1 Liters (dry fill)

----------------------------------------

Applications:
• Toyota RAV4 AWD (2019-2024, 2.5L A25A-FKS variants)
• Toyota Camry AWD (2020-2024, 2.5L A25A-FKS variants)
• Toyota Avalon AWD (2020-2021, 2.5L Dynamic Force variants)
• Lexus ES250 AWD (2021-2024, 2.5L A25A-FKS variants)

----------------------------------------

Complete Assembly Includes:
✅ Transmission case with internal 8-speed planetary gear train
✅ Torque converter with multi-plate lock-up clutch
✅ Valve body with linear shift solenoids
✅ Integrated AWD transfer case output interface
✅ Oil pump, internal filter, and clutch packs
✅ Speed sensors and sealing gaskets

Note: Mounts, shift cables, external cooler lines, and wiring adapters may need to be transferred or purchased separately.

----------------------------------------

Key Features:
✅ 8-speed Direct Shift architecture for optimized acceleration and fuel economy
✅ Adaptive shift strategy learns driver habits
✅ Wide-range lock-up torque converter reduces hydraulic slippage
✅ Compatible with Toyota ATF WS fluid for extended service life
✅ Robust TNGA-K transverse AWD design for high-mileage sedan and SUV use

----------------------------------------

Technical Notes:

Installation Criticals:
• Fluid Fill: Must follow specific "fill and check temperature" procedure (35°C - 45°C) using a scan tool. Over/under-filling causes shift shock or failure.
• TCM Programming: Compensation code registration and adaptation reset are required after installation using Toyota Techstream (GTS).
• Torque Converter: Ensure full seating ("three clicks") into the oil pump drive gear before mating to the engine block to prevent pump damage.
• Cooler Flushing: Flush transmission oil warmer/cooler and lines thoroughly to remove metallic debris from the old unit.

Maintenance Tips:
• Use only genuine Toyota ATF WS fluid.
• Perform ECM/TCM memory reset and shift adaptation learning via OBD2 scanner after installation.
• Monitor transmission fluid temperature during heavy loads or AWD towing to prevent overheating.